Sand is not just sand
Picking the right sand for the job matters more than people realize. A fine, clean mason sand behaves completely differently than a coarse fill sand, and using the wrong one can cost you a do-over. Here's what we carry and what each one is.
Types we carry
Mason sand is fine, clean, and consistent — light tan, uniform grain size, free of debris. Fill sand (sometimes called bank-run sand) is coarser, less processed, and less expensive — a workhorse material for backfill and grading. Concrete sand (ASTM C33) is a gritty, washed sand with a specific gradation used in concrete mix designs. Play sand is the cleanest and finest option we carry — washed and screened to a soft, uniform texture.
Common uses
Sand shows up under above-ground pools as a smooth leveling bed, in volleyball courts, around horse arena footing, in mortar and masonry mix work, for trench backfill and grading on industrial sites, and for filling sandbags during snowmelt season.
How much do I need?
A cubic yard of sand covers about 160 square feet at 2 inches deep or 110 square feet at 3 inches. A 12-foot above-ground pool needs roughly 1 yard for a 2-inch leveling pad. For a 1-inch bedding course over a 10×12 ft area you want about 0.4 yards — order 0.5 to give yourself a margin.
How delivery works
Sand is heavy. A single yard runs about 2,500–3,000 pounds, so we'll match the truck to your load and your driveway's load capacity. Tell us when you order if access is tight or if you've got a soft lawn area to avoid.

